Video Intercom Door Station·User Manual
76
9.4 Picture Storage
When the video intercom device is under armed status, it will capture the picture
automatically after unlocking the door. The captured picture can be uploaded and stored
in the storage server.
When starting the live view of door station via iVMS-4200, you can capture the live view
picture. The captured picture can be uploaded and stored in the storage server.
This function is only available to door stations.
You are required to add storage server to the iVMS-4200, and format the HDDs first
before uploading and storing captured pictures.
9.4.1 Adding Storage Server
Before you start:
The storage server application software needs to be installed and it is packed in the
iVMS-4200 software package. When installing the iVMS-4200, check the checkbox of
Storage Server to enable the installation of storage server.
1. Click the icon on the desktop to run the storage server.
2. Open the Device Management page and click the Server tab.
3. Click Add New Device Type, select Storage Server and click OK.
Figure 9-9 Adding Storage Server Type
To Next Page
Need help?
General
Weight and Dimensions
