5
Safety instructions
Pixel feature
This liquid crystal display product has ultrahigh color resolution.
While it’s effective pixels are up to 99.999% or higher, it is still
possible that a dark spot or a bright spot (red, green or blue)
constantly appears on the screen. This is the structure property
(within the general industrial standard) of the display rather than
a fault.
Safety
Please read and understand all instructions before using the
monitor safety . Damage resulting from nonobservance of the
instructions is not covered by the warranty.
Be careful of electric shock and fire!
·
Never make the monitor contact with rain or water. Never
place a liquid container (e.g., a vase) near or on the moni-
tor. Please disconnect the monitor’s power immediately if
a liquid is spilled on the monitor’s surface or inside. Please
contact the customer service center before using it again.
·
Never put a monitor, remote controller, or battery near an
open flame or other heat source (including direct sunlight).
In order to avoid flame spread, always keep candles or other
open flames away from monitors, remote controls, and batter-
ies.
·
Never insert any object into the ventilation slot or other openings on
the monitor.
·
Please make sure that the power line is not taut. The tightening
of the power line will loose the power connections and produce
sparks.
To Next Page
Loading...
