Need help?Do you have a question about the Hill-Rom 405 Electric Bed and is the answer not in the manual?
General| Type | Electric Bed |
|---|---|
| Model | 405 |
| Manufacturer | Hill-Rom |
| Power Source | Electric |
| Mattress Compatibility | Standard Hospital Mattress |
| Wheel Type | Locking Casters |
| Application | Medical |
| Dimensions | 84" L x 36" W |
| Adjustable Positions | Head |
| Control | Hand Pendant |
| Mattress Type | Foam |
| Side Rails | Optional |
| Overall Dimensions | 84" L x 36" W |
Provides essential safety guidelines for operating and servicing the bed.
Advises on patient monitoring, bed positioning, brake use, and lockout controls.
Warns against unsupported loads, improper attachment, and advises eye protection.
Covers shock hazards, moisture, fluid spills, and infection control protocols.
Initial steps and warnings before beginning troubleshooting.
Steps to gather data from operators about bed problems.
Procedures to test and verify bed functions after repairs.
Comprehensive troubleshooting for complete loss of bed functionality.
Detailed steps for diagnosing and fixing head up function issues.
Detailed steps for diagnosing and fixing head down function issues.
Troubleshooting steps for general head function failures.
Detailed steps for diagnosing and fixing knee up function issues.
Detailed steps for diagnosing and fixing knee down function issues.
Troubleshooting steps for general knee function failures.
Detailed steps for diagnosing and fixing hilow up function issues.
Detailed steps for diagnosing and fixing hilow down function issues.
Troubleshooting steps for general hilow function failures.
Troubleshooting steps for the automatic contour up feature.
Troubleshooting steps for the automatic contour down feature.
Troubleshooting steps for Trendelenburg function issues.
Detailed troubleshooting for the CPR function.
Details the procedure for removing and replacing the control box.
Provides instructions for removing and replacing the foot end control panel.
Details the procedure for removing and replacing the Trendelenburg control box.
Instructions for removing and replacing Trendelenburg assemblies.
Detailed steps for removing and replacing the head motor.
Procedure for removing and replacing the CPR cable.
Detailed steps for removing and replacing the knee motor.
Detailed steps for removing and replacing the hilow motor.
Instructions for removing and replacing siderails.
Explains the importance and process of regular preventive maintenance.
Instructions for adjusting the CPR cable for proper head section lowering speed.
To Next Page