Hill AFT - Product Features; Basic Table Components and Options; Specifications

Product Features
1.1 Basic Table Components & Options
1. Tilting Headpiece. May include several options
2. Thoracic Drop with Thoracic Release/Breakaway.
3. Lumbar Drop
4. Pelvic Drop on Flexion Section
5. Tiller Bar for Lateral Movement
6. Slide-out Ankle Support with Ankle Harnesses
7. Flexion Control Panel
8. Armrest
9. Adjustable Patient Gripper Bars
10. Power and Air-Drop Control Panel (air-models)
11. Rocker Foot Pedal for Height Adjustment
12. Power Foot Strips for activating Air-Drops (optional)
13. Air-Pressure Foot Pedal (air-models)
14. Drop Tension Control Knobs
15. Cocking Handles for Manual Drops
1.2 Specifications
• Electric requirement 115 v~, 60 Hz, 10 A/ AirAFT - 10 A (or 230v~, 50 Hz)
Important: See note about using a voltage regulator on page 12
• Lifting capacity - 450 pounds
• Acrylic thermo-plastic base
• Ultra-Cell
®
foam for comfort and shape retention
• Height Range - 21
1
/
2
”-29” or 22
1
/
2
”-30”
• Shipping weight approximately 250-300 lbs.
• Length - 5' 5" (extends to 6'2" ), with cervical drop - 5’7” to 6’4”
• Standard width 24”, optional 27” and 30”
1
2
3
4
5
6
7
8
11
10
13
14
12
2
© Copyright 2020, Hill Laboratories
9
15