What to do if Hillrom Centuris P750 Medical Equipment bed overheats?
The bed is designed to protect itself from overheating. To prevent overheating during clinical tasks, avoid operating functions more than necessary. If the bed shuts down due to extensive operation: 1. Unplug it from the power source. 2. Allow it to cool for 20 minutes. 3. Plug it back into a suitable power outlet. If the issue persists, contact Hillrom Technical Support.
Why does the Lockout indicator flash continuously on Hillrom Centuris P750 Medical Equipment?
The Lockout indicator flashes continuously because an abnormal voltage drop was detected when a control was activated, locking all articulation functions. Inform facility-authorized persons to perform troubleshooting. If the problem still continues, call Hillrom Technical Support.
General| Brand | Hillrom |
|---|---|
| Model | Centuris P750 |
| Category | Medical Equipment |
| Language | English |
Defines the purpose and environment for the Centuris Bed System.
Specifies the physical characteristics of patients suitable for the bed.
Provides an overview of the manual's purpose and reading recommendations.
Explains typefaces and symbols used for manual readability.
Lists and describes symbols found on the Centuris Bed System.
Covers critical warnings for bed operation and patient safety.
Addresses proper disposal of batteries and electronic waste.
Provides safety guidelines and warnings related to the bed's siderails.
Details warnings and guidelines for using patient restraints safely.
Explains the importance of using brakes correctly to prevent injury.
Outlines warnings and precautions for electrical connections and safety.
Specifies that the CPR function is for healthcare professionals only.
Includes warnings about mattress size and patient safety.
Offers warnings and guidelines for safely transporting the bed.
Describes the physical components and structure of the bed.
Explains the two configurations of brake and steer systems.
Explains the installation slots for patient restraint straps.
Describes how to extend and retract the foot section of the bed.
Explains the function and charging of the bed's battery backup.
Offers warnings and instructions for managing the power cord.
Explains the two positions for the adjustable foot panel.
Details the installation and use of the removable IV pole.
Describes the installation and height adjustment of the offset style IV pole.
Outlines installation and safety warnings for the oxygen tank holder.
Details the installation and load capacity of the patient helper.
Explains mounting, operation, and safety for the traction frame.
Introduces caregiver controls and general operation notes.
Details the procedure for using the emergency CPR handle.
Explains the procedure for raising and lowering bed siderails.
Details how to raise and lower the bed's head section.
Explains the functionality of the Auto Contour™ mode.
Describes how to adjust the knee section of the bed.
Explains how to adjust the overall height of the bed.
Details the procedure for positioning the bed in Trendelenburg.
Explains how to lock and unlock bed controls to prevent movement.
Introduces the pendant controls for caregiver operation.
Describes how to lock and unlock functions via the pendant.
Describes the controls available to the patient on the siderail.
Provides steps to resolve overheating or shutdown issues.
Explains how to address flashing lockout indicators.
Identifies product details and lists the physical dimensions of the bed system.
Details functional specs, operating conditions, and power requirements.
Discusses EMC requirements and precautions for the device.
To Next Page