Need help?Do you have a question about the Hillrom Compella and is the answer not in the manual?
General| Frame Material | Steel |
|---|---|
| Bed Width | 42 inches (107 cm) |
| Bed Length | 84 inches (213 cm) |
| Integrated Scale | integrated scale |
| Side Rail | side rails |
| Bed Frame Width | 42 inches (107 cm) |
| Bed Frame Length | 84 inches (213 cm) |
| Overall Length | 84 inches (213 cm) |
| Overall Width | 42 inches (107 cm) |
| Mattress Width | 42 inches (107 cm) |
| Mattress Length | 84 inches (213 cm) |
| Wheel Size | 5 inches (13 cm) |
| Features | integrated scale, side rails |
| Overall Height | 17.5 - 32 inches (44.5 - 81 cm) |
Features of the IntelliDrive XL Transport System, detailing its components and functions.
Instructions for configuring the air surface with patient height and weight.
Description of the bed system's intended use and patient population.
Intended use of the therapy support surface for patient care.
Instructions and location of CPR controls for emergency use.
Controls for patient-initiated Head Up/Down and Knee Up/Down.
Instructions for raising and lowering the entire bed.
Instructions for adjusting head and knee sections.
Automated control for adjusting the bed's width.
Using powered controls to extend or retract bed width.
Operation of the powered drive system for transport.
Critical safety precautions for bed transport.
Steps to ready the bed before moving it.
How to activate the transport mode using the transport pod.
Important safety considerations during bed transport.
Safety warnings specific to non-powered transport.
Procedure to zero the scale before weighing.
Steps for obtaining a patient's weight using the scale.
Zeroing the scale in reference position for Scale B.
Weighing the patient accurately with Scale B.
Steps to activate the single-mode bed exit alert.
Steps to turn off the single-mode bed exit alert.
Steps to activate one of the three bed exit alert modes.
Safety warnings related to the support surface and bed frame.
Warnings concerning the proper use and maintenance of the support surface.
Warnings regarding the safe operation of the air supply unit.
Critical safety warnings related to cleaning procedures.
Important cautions and recommendations before starting cleaning.
Distinction between cleaning and disinfection processes.
Detailed instructions for the initial cleaning phase.
Detailed instructions for the disinfection phase.
General guidelines and benefits of preventive maintenance.
Troubleshooting alarms related to the therapy surface.
Troubleshooting alarms specific to the foam surface.
Troubleshooting issues with powered width adjustments.
Diagnosing problems with head section articulation.
To Next Page