Name: Hillrom P7800
Brand: Hillrom
Rating: 5 (1 reviews)

To Next Page

Compella

™

Bariatric

Bed System

Instructions for Use

Product No. P7800

178951 REV 6

Quick View™ List of Features3
- Powered Width Controls3
- Caregiver Control Pod4
- Air Supply Unit5
Revision7
Table of Contents9
Intended Use15
- Compella™ Bariatric Bed System15
- Compella™ Therapy Support Surface15
Introduction15
Symbols16
- Product Symbols16
Acronyms29
Safety Information29
Quick View™ List of Bed Features32
Information Indicators33
- Audible Indicators33
  - Brake Not Set33
- Visual Indicators33
Standard Features35
- CPR Controls35
  - Use the CPR Controls36
    - To Lower the Head of the Bed36
    - To Deflate the Air Surface36
  - To Inflate the Air Surface after CPR36
Power Cords36
Cord Hooks37
Head and Intermediate Siderails37
- Line-Of-Site® Angle Indicators38
- To Lower a Siderail38
- To Raise a Siderail38
Point of Care® Bed Controls39
- Standard Patient Controls39
  - Head Up/Down39
  - Knee Up/Down40
- Standard Caregiver Controls40
- Battery Back-Up43
- Brake and Steer Controls44
  - To Activate45
- Patient Restraint and Drainage Bag Holders45
  - Patient Restraints45
  - Drainage Bag Holders46
- Equipment Sockets46
- Night Light46
- Head Angle Digital Display46
- 30° Head Angle Alert47
- Bed Width Adjustment47
Patient Transport50
- Intellidrive® XL Transport System50
- Transport Pod50
- Non-Powered Transport55
  - Transport a Patient55
Scale "A" Display57
- Bed Setup57
Scale Systems57
Single Mode Bed Exit Alert System62
- To Activate the Bed Exit Alert System63
- To Silence the Bed Exit Alert System Without Deactivating the System63
- To Deactivate the Bed Exit Alert System64
- To Adjust the Alert Volume64
- To Change the Alert Tone64
Three-Mode Bed Exit Alert System65
- To Activate the Bed Exit Alert System65
- To Silence the Bed Exit Alert System Without Deactivating the System66
- To Deactivate the Bed Exit Alert System66
- To Adjust the Alert Volume66
- To Change the Alert Tone67
Sidecom® Communication System67
- Nurse Call Control67
  - To Activate68
Surface Features and Controls68
- Safety Information68
- Support Surface Options70
- Install the Surface and Air Supply Unit71
- Air Supply Unit73
- Compella™ Therapy Surface73
- Compella™ Foam Surface with Inflatable Side Bolsters81
  - Deflate and Inflate the Side Bolsters and Foot Section81
    - Automatically (Using the Caregiver Width Adjust Controls)81
    - Manually (Using the Air Supply Unit)82
  - Deflate the Side Bolsters and Foot Section for Patient Transport83
- Air Supply Unit-Informational Tones83
Accessories84
- Accessories for North America85
- Accessories for International90
Cleaning and Disinfecting92
- Recommendations93
- Cleaning and Disinfection93
- Laundry Guidelines96
- Clean the Air Supply Unit Filters96
Preventive Maintenance97
- Batteries97
  - Bed Frame98
  - Intellidrive® XL Transport System98
- Air Supply Unit-Filters Replacement98
Decommissioning and Disposal Instructions99
Expected Life99
Troubleshooting100
- Solve a System Alarm Condition on a Compella™ Therapy Surface100
- Solve a System Alarm Condition on a Compella™ Foam Surface101
- Surface and Air Supply Unit-Power Failure and Alarm Conditions101
  - Power Failure101
  - Alarm/Alert System101
    - Notification Priority102
- Powered Width Extensions will Not Extend or Retract103
- The Head Section will Not Rise or Lower103
- The Bed CPR Handle Does Not Return to the Disengaged Position104
Service Calls104
Specifications105

Brand	Hillrom
Model	P7800
Category	Medical Equipment
Language	English

Hillrom P7800 User Manual

Table of Contents

Questions and Answers:

Hillrom P7800 Specifications

Related product manuals