Need help?Do you have a question about the Hillrom P7900 and is the answer not in the manual?
General| Type | Patient Monitor |
|---|---|
| Parameters | ECG, SpO2, NIBP, Temperature, Respiration |
| Connectivity | Ethernet, USB, optional Wi-Fi |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Battery Life | Up to 4 hours |
Defines the purpose and intended use of the Centrella® Smart+ Bed in healthcare.
Details warnings and precautions for safe operation and to prevent injury or damage.
Details the controls and functions available on the GCI touchscreen.
Explains the meaning of various indicators and how they signal bed status.
Explains the operation of the CPR control for rapid bed flattening.
Explains the operation of brake and steer controls and available systems.
Details siderail operation, safety warnings, and their purpose.
Details SafeView®+ Alerts Option and its floor projection indicators.
Describes the auxiliary outlet for accessory power and associated warnings.
Details safety warnings and general operation for point-of-care controls.
Explains the controls located on the caregiver side of the head siderails.
Explains how to activate, silence, and deactivate the bed exit alert system.
Describes how to lock out bed articulation controls to prevent unintended movement.
Instructions for raising and lowering the bed using the controls.
Covers Obstacle Detect® System and Head Up/Down controls.
Details Knee Up/Down, Foot Up/Down, and Trendelenburg controls.
Describes the one-button system for leveling and Trendelenburg.
Covers Patient Controls and Nurse Call Control.
Explains the SideCom® system for nurse call and entertainment features.
Details the New Patient (Zero) scale procedure.
Explains Re-Zero (Same Patient) scale procedure and notes.
Defines the intended use of the HR and Respiration Rate Monitoring System.
Safety information, contraindications, and warnings for the HR/RR monitoring system.
Explains the audible and visual indicators for alarms and alerts.
Step-by-step guide to activate the 90-day trial mode for the monitoring system.
Step-by-step guide to activate the licensed mode for the monitoring system.
Instructions to reset HR/RR data using the New Patient scale procedure.
Step-by-step guide for performing the New Patient scale zeroing procedure for HR/RR.
Explains the types of alarms and indicators for the HR/RR system.
Critical safety warnings and precautions for patient transport.
Steps to prepare the bed and secure equipment before transport.
Step-by-step guide for operating the powered transport system.
General warnings and guidelines for cleaning and disinfection.
Detailed instructions for the cleaning step of the process.
Detailed instructions for the disinfection step of the process.
Outlines the preventive maintenance program and its importance.
Guidance on safe decommissioning and disposal of the bed and accessories.
Explains causes of power loss and operation on battery backup.
Lists checks to perform if the bed fails to lower.
To Next Page
