Need help?Do you have a question about the Hillrom Life2000 BT-20-0022 and is the answer not in the manual?
General| Brand | Hillrom |
|---|---|
| Model | Life2000 BT-20-0022 |
| Category | Medical Equipment |
| Language | English |
Describes the intended use and patient population for the ventilation system.
Explains symbols and conventions used throughout the manual for clarity.
Provides crucial safety warnings and precautions for using the ventilation system.
Lists the items included in the ventilation system packaging for user reference.
Details the different released versions of the Life2000 ventilator.
Identifies and illustrates the various components of the Life2000 ventilation system.
Explains the setup and use of the ventilator in an extended range configuration.
Details how to connect and use the ventilator in a stand-alone configuration.
Introduces the extended range configuration for daily living activities.
Provides a checklist for setting up the ventilation system in extended range mode.
Outlines the procedure for testing the ventilation system before patient use.
Introduces the stand-alone configuration using an alternate pressure source.
Provides a checklist for setting up the ventilation system in stand-alone mode.
Describes the Universal Circuit® Connector for patient interface connections.
Details the Breathe Pillows Entrainment Interface for patient use.
Provides instructions on how to properly wear the Breathe Pillows Entrainment Interface.
Introduces accessing and navigating ventilation settings via the touch screen.
Describes the Home Screen, indicating the ventilator is ready for use.
Explains how to access different menus like Settings and Information.
Guides on accessing and modifying clinical settings, including password protection.
Details how to edit and activate prescription settings for patient therapy.
Lists the default prescription settings that can be edited by clinicians.
Explains the two types of breaths: Mandatory and Assisted.
Describes the available ventilation modes: Control, Assist/Control, and Assist.
Guides on setting ventilation parameters for Control Ventilation mode.
Guides on setting ventilation parameters for Assist Ventilation mode.
Details how to set critical alarm limits for breath rate and peak inspiratory pressure.
Explains how to select the appropriate source gas (Air or O2).
Describes how to select an activity button to start ventilation therapy.
Guides on adjusting trigger sensitivity for optimal patient effort detection.
Explains how to access the Utilities menu for system adjustments.
Guides on setting the system's time and date.
Explains how to change alarm notifications from audible to vibration mode.
Guides on adjusting the loudness of audible alarms.
Guides on adjusting the touch screen brightness.
Shows how to view software version and operational data.
Provides a summary of the factory default settings for the ventilator.
Introduces the different types of alarms and alerts for the ventilation system.
Explains how ventilator alarms are displayed, including priority levels.
Describes how to view and manage active alarms on the touch screen.
Details the procedure for silencing and resolving on-screen alarms.
Lists and explains high, medium, and low priority ventilator alarms and their causes.
Lists and explains alerts originating from the compressor.
Addresses issues with the breath indicator light and missing breaths.
Discusses troubleshooting steps when no volume output is detected.
Troubleshoots gas delivery without patient effort, related to trigger sensitivity.
Addresses issues related to the duration of oxygen cylinder supply.
Instructions for cleaning the system before its initial use.
Daily inspection procedures for system components to ensure proper function.
Criteria for assessing the essential performance of the ventilation system.
Specifies the acceptable operating and storage environmental conditions.
Procedures for verifying that ventilator alarms are functioning correctly.
Provides instructions for cleaning and disinfecting the entire ventilation system.
Specific cleaning instructions for single-patient use scenarios.
Procedures for cleaning and disinfecting the system before use with a new patient.
Detailed steps for cleaning patient interfaces.
Instructions for purging the Universal Circuit® Connector after cleaning.
Instructions for purging the Breathe Pillows Entrainment Interface.
Outlines scheduled preventive maintenance for the system.
Guides on checking, emptying, and replacing the compressor's condensation tray.
Guides on checking and replacing the compressor's air inlet filter.
Guides on checking and replacing the compressor's cooling filter assembly.
Instructions for trained personnel to test ventilator alarms.
Details the setup required for performing alarm testing procedures.
Tests the medium-priority low gas pressure alarm.
Tests high and low delivery pressure alarms.
Tests the high-priority high PIP pressure alarm.
Tests breath timeout and high circuit pressure alarms.
Tests the medium-priority high breath rate alarm.
Tests the medium-priority low breath rate alarm.
Tests battery low and very low battery alarms.
Explains how to check the ventilator's current battery charge level.
Lists the technical specifications for the ventilator's battery.
Describes how to check the compressor's battery charge status.
Information on compressor battery status when connected to AC power.
Specifications for the ventilator battery charger and its power cord.
Specifications for the compressor power supply and its power cord.
Information and recommendations for oxygen monitors.
Information and recommendations for exhaled volume monitors.
Table showing volume adjustments for different altitudes.
Detailed technical performance specifications of the ventilation system.
Declaration regarding electromagnetic emissions compliance and guidance.
Declaration regarding electromagnetic immunity compliance and guidance.
Explains icons related to ventilator ports, buttons, and status indicators.
Explains icons for battery status, safety ratings, and environmental warnings.
Explains icons for compliance, manufacturer identification, and usage guidelines.
Explains icons for compressor controls and activity button functions.
Lists available accessories and replacement parts for the system.
Provides FiO2 (Fraction of Inspired Oxygen) tables for different configurations.
Information on estimating oxygen cylinder duration based on usage.
Step-by-step instructions for replacing the source gas cylinder.
Graph showing potential tidal volumes based on ventilator settings.
Outlines the terms and conditions of the product's limited warranty.
To Next Page