What to do if my Hillyard TRIDENT T26 SC PLUS Floor Machine does not start?
If your Hillyard Floor Machine doesn't start, first ensure that the main switch is set to “I” by turning the key clockwise. If this doesn't resolve the issue, and the battery charge level is critical, perform a complete recharge cycle. Also, ensure the batteries are correctly connected inside the machine.
Why are the batteries not charging correctly on my Hillyard TRIDENT T26 SC PLUS?
If the batteries of your Hillyard Floor Machine (versions with built-in battery charger) are not charging correctly, check these: * Ensure the plug on the battery charger cable is correctly inserted in the socket on the battery charger itself. * Verify the battery charger power supply cable plug is connected to the mains socket. * Confirm that the characteristics in the battery charger plate match those of the mains supply.
General| Brand | Hillyard |
|---|---|
| Model | TRIDENT T26 SC PLUS |
| Category | Floor Machine |
| Language | English |
Specific safety precautions and dangers related to recharging the machine's batteries.
Procedures for safely shutting down and preparing the machine for storage.
Critical safety warnings and precautions to follow during maintenance tasks.
Explains the meaning of symbols and labels found on the machine itself.
Identifies and explains the symbols displayed on the machine's control panel.
Instructions for unpacking, handling, and safely moving the machine.
Safety precautions to ensure correct battery installation and handling.
Procedures for battery types, installation, connection, charging, and maintenance.
Steps for attaching the brush head and squeegee body to the machine.
Instructions for filling the solution tank with water and detergent.
Essential checks and preparations before starting machine operation.
Step-by-step guide to power on, set up, and begin machine use.
Explains the 'Transfer' and 'Scrubbing Without Drying' operational modes.
Details on using 'Drying' and 'Scrubbing With Drying' operational modes.
How to use the DS selector to choose working programs and modes.
Information on activating Eco, Manual, Zone, and Reverse functions.
Using extra brush pressure and the Hillyard Dosing Control system.
Accessing training, emergency stops, hour meter, and battery indicators.
Using the vacuum wand kit and the smart drying system functions.
Resolving alarms and procedures for ending work operations.
Procedures for cleaning the brush head, squeegee body, and recovery tank filters.
Steps for emptying and cleaning the recovery tank and its filters.
Specific instructions for cleaning recovery tank filters with and without the kit.
Procedures for emptying and cleaning the solution tank and water filter.
Replacing brush head brushes and cleaning the vacuum tube.
How to replace and adjust the squeegee body rubber blades for optimal performance.
Guidelines for machine disposal and selecting appropriate brushes.
Solutions for issues preventing the machine from starting or moving correctly.
Troubleshooting problems related to cleaning, detergent, foam, and vacuuming.
To Next Page
