Why is my Hillyard Scrubber not turning on?
Your Hillyard Scrubber might not be turning on because the main switch is in the “0” position. Ensure the main switch is correctly activated by pressing it. Also, check that the battery is correctly inserted into the appliance. If the battery charge level is low, perform a complete recharge cycle.
What to do if Hillyard Scrubber squeegee does not dry perfectly?
If the squeegee on your Hillyard Scrubber isn't drying perfectly, the vacuum device might be obstructed. Ensure the squeegee, vacuum hose and vacuum cover are free from obstructions. Also, check that the drainage cap on the recovery tank and the vacuum cover are properly positioned.
Why is my Hillyard Scrubber not vacuuming correctly?
If your Hillyard Scrubber is not vacuuming correctly, it could be due to several reasons. The recovery tank might be full, so empty it. The vacuum device could be obstructed. Also, clean the floating support rotation fulcrum.
How to fix Hillyard Scrubber not cleaning correctly?
If your Hillyard Scrubber is not cleaning correctly, it could be due to the appliance not switching on. Also, the amount of detergent solution dispensed may be inadequate. Check that the selected program is suitable for the work to be carried out. Ensure that the brush is correctly inserted into the appliance and is suited to the work. Check the wear on the brush and replace it if necessary.
Why Hillyard Scrubber battery has not been charged correctly?
If the battery of your Hillyard Scrubber hasn't been charged correctly, check that the power supply cable plug is correctly inserted in the battery charger base socket and in the mains socket. Also, make sure that the features set out of the battery charger information plate match those of the power supply network. If the LED on the battery charger base flashes repeatedly, check the meaning of the flashing signals in the battery charger use and maintenance manual.
What to do if Hillyard Scrubber has excessive foam production?
If your Hillyard Scrubber is producing excessive foam, ensure that you are using a low foam detergent. If necessary, add a small quantity of antifoam liquid to the recovery tank. If the floor is not very dirty, dilute the detergent inside the solution tank.
Why is there not enough detergent solution on the brush of my Hillyard Scrubber?
If there's not enough detergent solution on the brush of your Hillyard Scrubber, the quantity of detergent solution in the water system may not be suited to the work. Ensure that the quantity of detergent solution in the water system of the appliance is appropriate to the work. Also, the detergent solution filter might be blocked; if so, proceed with cleaning it.
Why does my Hillyard Scrubber have a very low operating autonomy?
If the Hillyard Scrubber has a very low operating autonomy, and the battery charge level is critical, perform a complete recharge cycle.
Details on identifying serial numbers and contacting technical support.
Overview of key technical specifications and data for the machine.
Step-by-step guide to diagnose and resolve common machine issues.
Instructions for safely taking apart machine components for maintenance or repair.
Details on the machine's electrical components, structure, and functions.
Description of the system responsible for scrubbing and cleaning the floor.
Procedures for adjusting the squeegee for proper drying performance.
Routine checks and maintenance tasks for the drying system components.
Description of the machine's frame and wheel components.
Explanation of the frame, traction, and wheel assembly.
Procedures for maintaining and checking the frame and wheel system.
Components of the system for delivering cleaning solution.
Explanation of how the cleaning solution is mixed, filtered, and supplied.
Routine checks and maintenance for the solution supply components.
List of consumable parts like brushes and rubber components.
List of recommended spare parts including electrical and mechanical components.
General| Brand | Hillyard |
|---|---|
| Model | TRIDENT XM13SC |
| Category | Floor Machine |
| Language | English |
To Next Page
