Need help?Do you have a question about the Hilti DGH 150 and is the answer not in the manual?
Explains symbols for PPE, electrical hazards, RPM, rated speed, diameter, AC, protection class, NFC, side handle.
Covers work area, electrical, and personal safety. Follow all instructions to avoid injury.
Specific warnings for grinding/sanding: intended use, accessories, speed, diameter, mounting, damaged accessories, PPE, bystanders, cord.
Explains kickback, its causes, and precautions like firm grip, hand positioning, and avoiding corners.
Prohibits unapproved accessories, wet grinding, projecting objects, using without dust extractor, or incorrect speed.
Procedure for sanding operation, including pressure, cooling, and how to switch the tool off.
Explains symbols for PPE, electrical hazards, RPM, rated speed, diameter, AC, protection class, NFC, side handle.
Covers work area, electrical, and personal safety. Follow all instructions to avoid injury.
Specific warnings for grinding/sanding: intended use, accessories, speed, diameter, mounting, damaged accessories, PPE, bystanders, cord.
Explains kickback, its causes, and precautions like firm grip, hand positioning, and avoiding corners.
Prohibits unapproved accessories, wet grinding, projecting objects, using without dust extractor, or incorrect speed.
Procedure for sanding operation, including pressure, cooling, and how to switch the tool off.
General| Power Input | 1500 W |
|---|---|
| Disc Diameter | 150 mm |
| No-Load Speed | 8500 RPM |
| Spindle Thread | M14 |
| No load RPM | 8500 RPM |
To Next Page
