Need help?Do you have a question about the Hilti DSH 600 and is the answer not in the manual?
General| Engine Power | 3.2 kW |
|---|---|
| Blade Diameter | 300 mm |
| Cutting Depth | 100 mm |
| Max. Cutting Depth | 100 mm |
| Arbor Size | 20 mm |
Read this manual before initial operation for safe handling and use.
Explains signal words, documentation symbols, and illustration symbols.
Lists and explains symbols used on the product itself.
Lists and explains warnings found on machine labels.
Lists and explains prohibition labels found on machine labels.
Covers operator PPE, handling, posture, clothing, and general safe practices.
Precautions to prevent electric shock from damaged cables or machine parts.
Guidelines for a safe work environment, including lighting, tidiness, and hazards.
Safe practices for handling gasoline, oil, and their vapors.
Rules for selecting, using, and handling cutting discs safely.
Instructions for safe transport, storage, and cooling down the product.
Warning about chemicals in fuel and combustion products known to cause harm.
Identifies all components of the gasoline-powered cut-off saw with a labeled diagram.
Details the product's designated purpose and limitations for wet/dry cutting.
Outlines specific actions considered misuse of the gasoline-powered saw.
Provides guidance on using the wet cutting method and general operation.
Specifies requirements for diamond and resin-bonded cutting discs.
Lists the components and accessories included with the product.
Lists key technical parameters for DSH 600/DSH 600-X models.
Details engine, ignition, spark plug, fuel mixture, and tank capacity.
Provides crucial safety and mixing instructions for fuel and two-stroke oil.
Details the correct ratio and procedure for mixing fuel and oil.
Step-by-step instructions for safely filling the product's fuel tank.
Provides safety warnings and procedures for mounting cutting discs.
Provides safety warnings and step-by-step instructions for starting the engine.
Verifies correct operation of the cutting disc and start/stop switch.
Outlines the safe procedure for stopping the machine's engine.
Advises on holding the tool, avoiding obstacles, and securing workpieces.
Discusses reasons for disc stalling and hazardous situations to avoid.
A schedule of checks before use, every 6 months, and as needed.
Details on cleaning or replacing the air filter to ensure proper engine function.
Provides detailed steps for replacing a broken starter cord assembly.
Steps for removing and replacing the fuel filter to ensure proper fuel delivery.
Covers cleaning, gapping, and replacing the spark plug for ignition system health.
Explains how to adjust the engine idling speed for smooth operation.
Steps to clean the water nozzles on the distributor.
General advice on keeping the product clean and using genuine parts.
Regular inspection of external parts and controls for proper function.
Verifies safety devices function correctly after maintenance.
Safety precautions for transporting the product, including emptying fuel.
Safe storage advice for mixed fuel, emphasizing small quantities.
Explains the warranty for the emission control system of the engine.
Details the warranty for repair or replacement of defective parts.
To Next Page
