Need help?Do you have a question about the Hilti DSH 900 and is the answer not in the manual?
Read documentation before initial operation for safe handling and use.
Explains warning signal words (Danger, Warning, Caution) and symbols used in the document.
Lists symbols used on the product itself, such as operational controls and safety indicators.
Details warning and prohibition symbols applied as labels on the machine.
Provides details about the abrasive-disc cut-off saw, including model and serial number.
States compliance with applicable directives and standards; technical documentation location.
Essential safety precautions for operating the tool, including protective equipment and proper handling.
Safety measures related to electrical hazards when working with the machine or in its vicinity.
Guidelines for maintaining a safe working environment, including lighting, tidiness, and hazard awareness.
Safety instructions for handling fuels, avoiding vapors, and performing cutting operations correctly.
Guidelines for safely transporting and storing the product and its accessories.
Identifies and illustrates the main components of the gasoline-powered cut-off saw.
Provides an overview of the saw trolley accessory and its components.
Specifies the intended purpose and limitations of the abrasive-disc cut-off saw.
Offers advice for optimal operation, including wet cutting and disc usage.
Details the types of cutting discs approved for use with the product.
Lists the components included with the gasoline-powered saw.
Lists parts that require regular replacement or maintenance.
Presents technical specifications for different models of the cut-off saw.
Provides further technical details about the engine, fuel, and specifications.
Details noise and vibration levels determined according to ISO standards.
Explains the importance of fuel mixture quality for engine performance and life expectancy.
Covers assembly procedures and step-by-step instructions for safely filling the fuel tank.
Detailed instructions on how to correctly install a cutting disc onto the machine.
Instructions for adjusting the guard for optimal safety and protection.
Explains how to lock the guide wheels to prevent saw movement when not in use.
Steps for securely mounting the gasoline-powered saw onto the saw trolley accessory.
Instructions for attaching and removing the water pump accessory to the saw.
Detailed procedure for starting the engine, covering cold and hot engine conditions.
Essential checks to perform after the engine has started to ensure proper function.
Correct procedure for safely shutting down the engine.
Best practices and safety instructions for performing various cutting operations.
A table outlining maintenance tasks and their recommended frequency (before use, every 6 months, if necessary).
Instructions for cleaning or replacing the air filter to maintain engine performance.
Procedures for replacing a broken starter cord and the fuel filter.
Procedures for cleaning, gapping, or replacing the spark plug for optimal engine starting.
Instructions for adjusting the engine's idling speed via the carburetor.
General advice on cleaning and maintaining the product's exterior and components.
Safety precautions and steps for transporting the saw in a vehicle.
Guidelines for safely storing fuel mixtures to prevent pressure buildup and fire hazards.
A table listing common problems and their possible causes and actions to resolve them.
Information on recycling materials and proper disposal of the product and drilling slurry.
Information regarding hazardous substances in compliance with China RoHS regulations.
Information on how to contact Hilti for warranty-related questions.
To Next Page
General
