16 English
▶ Observe the safety instructions and warnings in this documentation and
on the product.
▶ This document forms a permanent, integral part of the product described
and must always be with the product when it is handed over to other
persons.
1.3 Laser information on the product
Laser information
Laser radiation. Do not stare into the beam. Class 2
laser.
1.4 Declaration of conformity
We declare, on our sole responsibility, that the product described here
complies with the applicable directives and standards. A copy of the
declaration of conformity can be found at the end of this documentation.
The technical documentation is filed and stored here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistraße 6 | 86916
Kaufering, DE
1.5 Product information
Hilti products are designed for professional use and may be operated, ser-
viced and maintained only by trained, authorized personnel. This personnel
must be informed of any particular hazards that may be encountered. The
product and its ancillary equipment may present hazards when used incor-
rectly by untrained personnel or when used not as directed.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to enquire about the product.
Product information
Type: PD-C | PD-CS
Generation: 01
Serial number:
To Next Page
Loading...
Need help?
General
