What to do if Hilti PD-S Measuring Instruments show error 254?
If your Hilti Measuring Instruments display error 254, it means the battery voltage is too low for measurement. Replace the batteries to resolve this issue.
What to do if Hilti PD-S Measuring Instruments show error 255?
If your Hilti Measuring Instruments display error 255, it indicates that the incoming signal is too weak. Try using a different target surface, such as white paper.
What to do if Hilti PD-S show error 256?
If your Hilti Measuring Instruments display error 256, it means the incoming signal is too strong. Try using a different target surface, such as white paper.
Why Hilti PD-S show error 257?
If your Hilti Measuring Instruments display error 257, it is because there is too much background light. Shade the target area to fix this.
Why Hilti Measuring Instruments show error 252?
If your Hilti Measuring Instruments display error 252, it means the temperature is too high. Allow the product to cool down before using it again.
Why Hilti PD-S show error 253?
If your Hilti Measuring Instruments display error 253, it means the temperature is too low. Warm up the product.
What to do if Hilti PD-S Measuring Instruments show error 258?
If your Hilti Measuring Instruments display error 258, it indicates that the measurement is out of measuring range. Correct the measuring range to resolve this.
What to do if Hilti Measuring Instruments show error 260?
If your Hilti Measuring Instruments display error 260, it means the laser beam was interrupted. Repeat the measurement.
What to do if Hilti Measuring Instruments show error 240?
If your Hilti Measuring Instruments display error 240, it indicates a data-transfer fault. Repeat the procedure.
How to fix Hilti PD-S error 204?
If your Hilti Measuring Instruments display error 204, it is due to a calculation error. Take the measurement again.
General| Type | Line/Point level |
|---|---|
| Product color | Red |
| International Protection (IP) code | IP54 |
| Laser class | 2 |
| Display type | Digital |
| Maximum range | 60 m |
| Country of origin | Germany |
| Leveling accuracy (±) | - mm/m |
| Distance measuring units | m |
| Self-leveling range (±) | - ° |
| Battery type | AAA |
| Battery voltage | 1.5 V |
| Battery capacity | 15 Ah |
| Battery technology | Alkaline |
| Battery included | Yes |
| Number of batteries included | 2 pc(s) |
| Accuracy | 1.5 mm |
| Minimum measurement distance | 0.2 m |
| Quantity per shipping (inner) case | 1 pc(s) |
| Number of shipping (inner) cases per master (outer) case | 5 pc(s) |
Weight and Dimensions| Package depth | 30 mm |
|---|---|
| Package width | 80 mm |
| Battery weight | 54 g |
| Package height | 20 mm |
| Package weight | 500 g |
Covers basic safety, general measures, workplace arrangement, and laser classification for Class 2 products.
Lists common fault codes, their possible causes, and recommended actions for resolution.
To Next Page
