Why doesn't my Hilti Laser Level tool work?
Your Hilti Laser Level might not be working because: * The battery is not fully inserted. Push the battery in until you hear it click. * The battery is discharged. Replace the discharged battery with a charged one.
What to do if the Hilti Laser Level battery doesn’t engage with an audible click?
If the battery doesn’t engage with an audible click, the retaining lugs on the battery may be dirty. Clean the retaining lugs and refit the battery.
What to do if my Hilti Laser Level tool gets very hot?
If your Hilti Laser Level tool or battery gets very hot, it may be due to an electrical fault. Immediately switch off the tool, remove the battery, keep it under observation, allow it to cool down and contact Hilti Service.
Why does my Hilti Laser Level battery run down quickly?
If the battery in your Hilti Laser Level is running down more quickly than usual, it could be due to a very low ambient temperature. Warm up the battery slowly to room temperature.
What to do if my Hilti PR 2-HS A12 Measuring Instruments tool or battery gets very hot?
If your Hilti Measuring Instruments tool or battery gets very hot, immediately switch off the tool and remove the battery. Keep the battery under observation, allow it to cool down, and then contact Hilti Service due to a potential electrical fault.
Details on signal words, symbols used in instructions and illustrations.
Explanation of symbols found on the product itself.
Covers basic safety instructions and general safety guidelines for safe operation.
Details on product identification, laser information, and initial safety warnings.
Guidelines for preparing the work area and understanding potential hazards.
Specific safety rules for laser use and handling battery-powered tools.
Details on the PR 2-HS A12 rotating laser and its components.
Description of the control panels and display interfaces for the laser and receiver.
Defines the product's purpose and highlights features like auto-leveling and shock warning.
Explanation of LED indicator meanings and Li-ion battery charge status.
Detailed technical data for the PR 2-HS rotating laser.
Detailed technical data for the PRA 20 laser receiver.
Proper handling of the laser tool and its battery, including insertion and removal.
Instructions for switching on and working in the horizontal plane.
Guidance on setting slopes and deactivating the shock warning function.
Procedure to check the main and transverse horizontal axes for accuracy.
Instructions for battery insertion, unit settings, and volume/signal adjustments.
Guidance on detecting beams and mounting the PRA 83 receiver.
Procedures for cleaning the tool, batteries, and the laser exit window.
Information on Hilti service for calibration and checking the tool's accuracy.
Guidelines for safe transport, storage, and common troubleshooting steps.
Information on the safe and environmentally responsible disposal of batteries and tools.
General| Brand | Hilti |
|---|---|
| Model | PR 2-HS A12 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
