Hilti PR 2-HS A12 - Technical Specifications; Rotating Laser Specifications

6 English 2131237
*2131237*
Status Meaning
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights. Charge status: 10 % to 25 %
1 LED blinks. Charge status: < 10 %
When the tool is in operation, the battery charge status is indicated in the display on the tool.
When not in operation, battery charge state can be indicated by lightly pressing the release button.
During charging, charge state is indicated by the LEDs on the battery (please refer to the operating
instructions for the charger).
3.1.9 Items supplied
PR 2-HS A12 rotating laser, PRA 20 (02) laser receiver, 2 batteries (AA cells), PRA 83 laser receiver holder,
2 manufacturer’s certificates, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Technical data, rotating laser
PR 2-HS
Rated voltage
10.8 V
Rated current
100 mA
Maximum relative humidity
80 %
Maximum site elevation above datum
6,561 ft - 10 in
(2,000 m)
Receiving range (diameter) PRA 20 (02)
6 ft - 10 in … 1,968 ft - 10 in
(2 m … 600 m)
Accuracy at 10 m (under standard ambient conditions in
accordance with MILSTD810G)
±0.02 in
(±0.5 mm)
Laser class
Visible, Laser Class 2,
620-690 nm/Po<4.85 mW ≥ 300 ⁄min;
EN 60825-1:2007; IEC 60825-1:2007
Speed of rotation
5.0 Hz
(300 /min)
Self-leveling range
±5°
Operating temperature
−4 ℉ … 122 ℉
(−20 ℃ … 50 ℃)
Storage temperature
−13 ℉ … 140 ℉
(−25 ℃ … 60 ℃)
Weight (including B12/2.6 and respectively B 1230 bat-
tery)
5.38 lb
(2.44 kg)
Drop test height (under standard ambient conditions in
accordance with MILSTD810G)
4 ft - 11 in
(1.5 m)
Tripod thread
5/8 in
Protection class in accordance with IEC 60529 (except
battery and battery compartment)
IP66
4.2 Technical data, laser receiver
Rated voltage
3 V
Rated current
150 mA
Maximum site elevation above datum
6,561 ft - 10 in
(2,000 m)