English 25
5 Preparation
5.1 Charging the built-in battery
▶ Charge the internal battery completely before using the tool for the first
time.
5.2 Switching on
1. Press the on/off switch briefly.
◁ The product is ready for operation in 30 seconds. The locked display is
shown.
2. To unlock the display, swipe the lock symbol off the screen to the right.
◁ The measurements for the currently active project are displayed and
can be used to select functions.
6 Regular product updates
Regular software updates are planned. Please download the
PD-C updater utility for PC as well as the latest product manual with
operating instructions and the latest software.
The permanent link for the PD-C updater utility for PC is:
https://www.hilti.com/updatePDC
Minimum requirements must be fulfilled in order to use the software. Details
can be found at www.hilti.com.
7 Switching off
1. Press the on/off switch for several seconds.
2. Select ‘Switch off’ from the menu.
3. Confirm the settings by pressing ‘OK’.
◁ The tool vibrates twice and switches itself off.
8 Care and maintenance
8.1 Care
Risk of damage! The plastic parts may be damaged by chemical
substances.
▶ Use only pure alcohol or water for cleaning.
1. Blow any dust off the glass.
2. Clean the tool with a soft clean cloth. If necessary, moisten the cloth
slightly with pure alcohol or a little water.
8.2 Maintenance
▶ To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
To Next Page
Loading...
Need help?
General
