2 English
1.3 Laser information on the product
Laser information
Laser radiation. Do not stare into the beam. Class 2 laser.
1.4 Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with
the applicable directives and standards. A copy of the declaration of conformity can be
found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering,
Germany
1.5 Product information
Hilti products are designed for professional use and may be operated, serviced and
maintained only by trained, authorized personnel. This personnel must be informed of
any particular hazards that may be encountered. The product and its ancillary equipment
may present hazards when used incorrectly by untrained personnel or when used not as
directed.
▶ Write down the serial number in the table below. You will be required to state the
product details when contacting Hilti Service or your local Hilti organization to enquire
about the product.
Product information
Type: PD-C | PD-CS
Generation: 01
Serial number:
2 Safety
2.1 Basic information concerning safety
CAUTION
Possible hazard or risk of electric shock or burning injuries! Attempting to
remove the battery presents a risk of electrical hazards, e.g. short circuiting, burning
injuries and leakage of harmful substances.
▶ Do not attempt to open the product. Have the battery replaced only by Hilti
Service.
Printed: 28.11.2017 | Doc-Nr: PUB / 5314372 / 000 / 01
To Next Page
Loading...
Need help?
General
