Hilti PMC 36 User Manual

To avoid the risk of injury, use only genuine Hilti accessories and additional equipment.
The tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
Modification of the tool is not permissible.
2.2 Features
The PMC 36 levels itself automatically within a range of 3.5°.
Self-leveling takes only approx. 5 seconds.
The combilaser gives an “Out of self-leveling range” warning when the self-leveling range is exceeded (the
laser beams blink).
The PMC 36 is characterized by its ease of operation and use, its rugged plastic casing and ease of transport
due to its compact dimensions and light weight.
The tool can be used together with the PMA 30 laser receiver.
In the normal operating mode, the tool switches itself off after 15 minutes. Sustained operating mode can be
activated by pressing and holding the on-switch for four seconds.
2.3 Items supplied with the cardboard box version
1 Combilaser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Laser visibility glasses
2 Target plate
1 Manufacturer’s certificate
2.4 Items supplied with the toolbox version
1 Combilaser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Pipe adapter
1 Wall mount
1 Frame clamp
1 Magnetic bracket
2 Target plate
1 Manufacturer’s certificate
en
15

Hilti PMC 36 Specifications

General

Brand	Hilti
Model	PMC 36
Category	Laser Level
Language	English