Hilti PR 2-HS User Manual

PR 2-HS I Quick guide I 2014
2
www.hilti.com.au
PR 2-HS Quick guide
Keyboards:
Slope
LED Leveling
LED Slope Mode On
Battery Status
LED Shock Warning
deactivated
On/Off
Shock Warning
Button
Slope Mode
Button
Units
(cm/mm)
Volume
On/Off
Set slope adapter
to 0%.
Mount PRA 79
Slope Adapter &
PR 2-HS on Tripod
1. Press
ON/OFF
2. Press Slope
Mode key
3. Wait for
leveling
When laser starts to rotate, turn slope
screw on slope adapter to set desired
inclination.
* Read the operating instructions before the tool is used for the first time

Hilti PR 2-HS Specifications

General

Type	Rotating Laser
Accuracy	±0.5 mm at 10 m
Self-leveling Range	±5°
Rotation Speed	600 rpm
Laser Class	Class 2
Operating Temperature Range	-20 - 50 °C
Protection Class	IP 66
Operating Time with Alkaline Battery	60 hours
Power Supply	rechargeable battery