Hilti PRE 3 User Manual

2.10 Charge status of the Li‑ion battery during operation
LEDs light constantly LEDs blink Charge status C
LED 1,2,3,4
-
C ≧ 75 %
LED 1,2,3
-
50 % ≦ C < 75 %
LED 1,2
-
25 % ≦ C < 50 %
LED 1
-
10 % ≦ C < 25 %
-
LED 1
C < 10 %
2.11 Charge status of the Li‑ion battery during charging while fitted to the tool
LEDs light constantly LEDs blink Charge status C
LED 1,2,3,4
-
= 100%
LED 1,2,3 LED 4
75 % ≦ C 100 %
LED 1,2 LED 3
50 % ≦ C75 %
LED 1 LED 2
25 % ≦ C50%
-
LED 1
C < 25 %
2.12 Charge status of the Li‑ion battery during charging while not fitted to the tool
If the red LED lights constantly, the battery is being charged.
If the red LED doesn’t light, the battery is fully charged.
3. Accessories
Various tripods PUA 20, PA 921, PUA 30 and
PA 931/2
Telescopic staffs
PA 950/960, PA 951/961, PA 962
and PUA 50
Slope adapter
PRA 78
Car charging connector
PRA 86
Height transfer device
PRA 81
4. Technical data
Right of technical changes reserved.
PRE 3
Receiving range (diameter)
With PRA 30 laser receiver: 2…400 m (6 to 1300 ft)
Accuracy
0.5 mm per 10 m of horizontal distance (0.2" over
32.8 ft, +75° F), temperature 24°C,
Laser class
Class 2, visible, 635 nm, < 1 mW (EN 60825-3:2007
/ IEC 60825 - 3:2007); class II (CFR 21 § 1040
(FDA))
Speed of rotation
300 r.p.m. ± 10%
Self-leveling range
10°
en
4

Hilti PRE 3 Specifications

General

Brand	Hilti
Model	PRE 3
Category	Laser Level
Language	English