Hilti SF 8M-A22 User Manual

*2065392*
2065392 English 7
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Drill/driver
Rated voltage
21.6 V
Weight in accordance with EPTA procedure 01/2003
2.7 kg
Speed 1st gear
0 /min … 320 /min
2nd gear
0 /min … 550 /min
3rd gear
0 /min … 1,250 /min
4th gear
0 /min … 2,150 /min
Torque range (15 settings)
2 Nm … 12 Nm
Ø drill bit (softwood)
1.5 mm … 32 mm
Ø drill bit (hardwood)
1.5 mm … 20 mm
Ø drill bit (metal)
1.5 mm … 20 mm
Ambient temperature for operation
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 70 ℃
4.2 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
Battery charging starting temperature
−10 ℃ … 45 ℃
4.3 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
SF 8M-A22
Emission sound pressure level (L
pA
)
77 dB(A)
Uncertainty (K
pA
)
3 dB(A)
Sound power level (L
WA
)
88 dB(A)
Uncertainty (K
WA
)
3 dB(A)
Total vibration
SF 8M-A22
Vibration emission value for screwdriving (a
h
)
< 2.5 m/s²
Uncertainty (K)
1.5 m/s²
Drilling in metal (a
h,D
)
< 2.5 m/s²
Uncertainty (K)
1.5 m/s²

Hilti SF 8M-A22 Specifications

General

Brand	Hilti
Model	SF 8M-A22
Category	Drill
Language	English