What to do if my Hilti Power Tool gets very warm?
If your Hilti Power Tool or its battery becomes very warm, this could be due to an electrical fault or because the tool is overloaded. Immediately switch off the power tool, remove the battery, keep it under observation, and allow it to cool down. If the tool is overloaded, consider selecting a more suitable power tool for the application.
Why my Hilti Power Tool doesn't run?
If your Hilti Power Tool doesn't run, make sure the battery is fully inserted. Push the battery in until you hear it click into place. Also, check the battery level and charge it if it's low.
Why does the battery of my Hilti Power Tool drain so fast?
If the battery of your Hilti Power Tool runs down more quickly than usual, it might be due to very low ambient temperature. Allow the battery to warm up slowly to room temperature.
How to unlock the switch on my Hilti Power Tool?
If the control switch on your Hilti Power Tool can’t be pressed because the switch is locked, it might be because the forward/reverse selector switch is in the middle position. Push the forward/reverse switch to the left or right.
What to do if my Hilti Power Tool battery doesn't click in?
If the battery doesn’t engage with an audible click on your Hilti Power Tool, the retaining lugs on the battery might be dirty. Clean the retaining lug and push the battery in until it engages. Contact Hilti Service if the problem persists.
Details about the purpose and prerequisites for reading this documentation for safe and trouble-free product use.
Explains the meaning of signal words and symbols used throughout the document to alert users to potential hazards.
Lists and explains the symbols that are specifically used on the product itself.
Provides comprehensive safety warnings and instructions for operating the power tool safely.
Defines the specific applications and purpose for which the drill/driver is designed.
Lists the components and accessories included with the drill/driver.
Presents detailed technical specifications for the SF 2-A and SFD 2-A models.
Details technical specifications related to the battery, including operating and storage temperatures.
Instructions for safely inserting and removing the battery pack from the tool.
Guidance on how to attach and use the optional belt hook for carrying the tool.
Explains how to adjust the torque setting for screwdriving operations.
Instructions on how to select the appropriate gear for different tasks.
Details on how to change the direction of rotation for the tool.
Steps for safely inserting and removing drill bits and other accessories.
Guidance on cleaning and general maintenance of the cordless tool.
Instructions for proper care and handling of the Li-ion battery packs.
Procedures for regular checks and maintenance to ensure tool functionality and safety.
Lists common problems, their possible causes, and recommended actions to resolve them.
To Next Page
General
