EasyManua.ls Logo

Hilti SID 2-A12 - Careful Handling and Use of Batteries; Description; Product Overview; Intended Use

Hilti SID 2-A12
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
*2235358*
2235358 English 23
Take breaks and exercise your fingers to improve the blood circulation.
Exposure to vibration during long periods of work can lead to disorders
of the blood vessels and nervous system in the fingers, hands and wrists.
Electrical safety
Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the power tool may
give you an electric shock if you damage an electric cable accidentally.
Power tool use and care
Secure the workpiece. Use clamps or a vice to hold the workpiece in
position. The workpiece is thus held more securely than by hand and
both hands remain free to operate the power tool.
Immediately switch off the power tool if the accessory tool jams. The
power tool might twist off-line.
Wait until the power tool stops completely before you lay it down.
2.4 Careful handling and use of batteries
Observe the special guidelines applicable to the transport, storage and
use of lithium-ion batteries.
Do not expose batteries to high temperatures, direct sunlight or fire.
Do not disassemble, crush or incinerate batteries and do not subject
them to temperatures over 80 °C (176 °F).
Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
If the battery is too hot to touch it may be defective. Put the battery in
a place where it is clearly visible and where there is no risk of fire, at an
adequate distance from flammable materials. Allow the battery to cool
down. If it is still too hot to touch after an hour, the battery is faulty.
Contact Hilti Service.
3 Description
3.1 Product overview 1
@
Forward / reverse switch
;
Grip
=
Illumination
%
Belt hook (optional)
&
Battery state of charge indica-
tor
(
Battery release button
)
Control switch
+
Hex. socket
3.2 Intended use
The product described is a hand-held cordless impact wrench. It is designed
for tightening and releasing nuts, bolts, anchors and wood screws.

Table of Contents

Related product manuals