8 English 378503
*378503*
shown on the rating plate of the tool. The operating voltage of the transformer
or generator must always be within +5 % and -15 % of the rated voltage of
the tool.
ST 1800
Rated power input
600 W
Weight
1.9 kg
(4.2 lb)
Speed (running under no load)
0 /min …
1,900 /min
Max. torque
22 Nm
(16 ftlb
f
)
Chuck
1
/
4
" hex socket
Protection class
II
Operating temperature
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 70 ℃
(−4 ℉ … 158 ℉)
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1.1 Fitting the scaffold hook
1. Push the scaffold hook onto the tool from the front.
2. Turn scaffold hook into the desired position.
3. Secure the scaffold hook by tightening the knurled thumb screw.
4. Check that the scaffold hook is fitted securely.
5.1.2 Fitting the depth gauge
WARNING
Electrical hazards There is a risk of electric shock if a screw is driven into
a concealed electric cable and, at the same time, the bit holder or depth
gauge is touched.
▶ Hold the product only by the grip when driving or removing screws.
1. Remove the protective sleeve. → page 9
To Next Page
Loading...
