HIMO C30R - Service Record; Bicycle Recycling; Warranty Clause and Condition; Additional Information

In order to maintain your warranty right, the bicycle should be not only maintained regularly
but also inspected carefully once or twice every year.
Abandon bicycle and parts thereof such as batteries and electrical components in a recycle
bin according to local laws and regulations.
Recycle the bicycle according to the manufacturer’s instructions for batteries and electrical
components.
Service Record
Warranty Clause and Condition
Bicycle Recycling
Please the recycle the abandoned bicycle according to the following procedure:
Additional Information
The bicycle is manufactured by SHANGHAI HIMO ELECTRICAL TECHNOLOGY CO., LTD.
at Room K50, 1F, Building 6, No. 4299 Jindu Road, Minhang District, Shanghai City.
SHANGHAI HIMO ELECTRICAL TECHNOLOGY CO., LTD. offers 1-year legal guarantee
for frame and front fork as of the purchase date and warranty service for any manufacturing
problems or material defects, including breakage or tear incurred during normal riding
(except improper use).
All vulnerable parts should be excluded from the warranty scope, e.g.: chain, pedal, synchro-
nous belt, tire, rim, hose, bearing, gearbox hanger, brake block, chain wheel, pinion,
underframe, outer tube of shifter and brake cable, oil paint and paster.
All damages arising from non-compliance of assembly instructions or improper use (jump,
special effect, single-wheel riding and alpine drop). The bicycle can be used for private
purpose only. Damages arising from rent, lease or participation in competition should be
excluded from the warranty scope. Unauthorized maintenance or refitting should be exclud-
ed from the warranty scope. Regular maintenance not accordance with this User Manual or
careful inspection conducted at least once or twice per year should be excluded from the
warranty scope. To apply for warranty service, please keep the original proof of purchase
and the service manual. Contents in the warranty scope should be validated as of the
purchase date.
The frame should:
Be in a conspicuous position, e.g.: Near the pedal crank, seat post or handlebar, and be
marked with continuous number obviously and permanently;
Manufacturer’s or authorized representative’s contact information and address;
Compliance with EN 15194 EPAC standard;
Applicable marks (CE) according to regulations;
Year of manufacture, namely completion date of manufacture (it cannot be a code);
Maximum speed 25km/h;
Maximum continuous rated power 0.25KW;
Maximum permissible total weight (e.g.: Marked near the seat post or the handlebar);
Name of series or type;
Single serial No. (if any);
Quality (if the mass of the electric power-assisted bicycle exceeds 25kg);
Under the most common configuration, mass of the electric power-assisted bicycle.