Himoinsa CEA7 - 9. Appendix I: Parameters Table; 1. User Access Level; 2. Maintenance Access Level; 3. Supervisor Access Level

(APPENDIX I) PARAMETERS TABLE | PAGE 56
9. APPENDIX I: PARAMETERS TABLE
The CEA7 control unit allows 3 levels of access for settings. To modify any of the
CEA7 control unit’s parameters validation is required by entering the
corresponding password. The 3 levels of access are:
1. User. Allows level 1 values to be read. (Default password: 1111).
2. Maintenance. Allows level 1 and level 2 parameters to be written. (Default
password: 1911).
3. Supervisor. Allows level 1, 2 and 3 parameters to be written.(Restricted
password, only for manufacturer).