Need help?Do you have a question about the Himoinsa M6 and is the answer not in the manual?
General| Model | M6 |
|---|---|
| Manufacturer | Himoinsa |
| Enclosure Rating | IP65 |
| Type | Generator Control Unit |
| Compatible Generators | Himoinsa diesel generators |
| Display | LCD |
| Control Functions | alarm management |
| Protection Features | High Engine Temperature, Low Oil Pressure |
Details how to start and stop the motor using the START button in manual mode.
Explains the functionality of the MAN, STOP, and AUTO modes selection key.
Regulates the motor's spark plugs heating during starting.
Activates a programmable time after detecting motor running for stabilization.
Drives the battery charge alternator during starting via a starting pulse.
Activates upon detection of any active error and before motor start in auto mode.
Activates the starter motor for a programmable maximum time.
Controls motor stopping, interconnected with emergency stop input.
Activated after preheating and remains active while the motor is running.
Calculates generator electrical signal frequency.
Calculates motor rotation speed.
Common input for reading alternator voltage frequency and motor speed.
Detects high water temperature alarm condition.
Indicates to the control unit that a low oil pressure alarm has occurred.
Detects a fuel reserve alarm condition.
Detects a motor auxiliary alarm condition.
Forces the starting of the genset when the M6 control unit is in automatic mode.
Connects an emergency stop for immediate motor stop.
Details the sequence of operations for starting the motor, including preheating and ignition.
Explains the process of stopping the motor, including cooling and deactivation sequences.
Orders the generator set motor to stop in a controlled manner and switches off the control unit.
Generator set starting and stopping controlled via the START button on the control panel.
Generator set starting and stopping controlled by external start input via voltage free contact (LT).
Diagram showing the layout of digital outputs, inputs, and power supply on the M6 control unit.
Details power supply terminals and NPN digital inputs for various functions.
Describes inputs for pick-up and generator sensors for speed and frequency.
Details PNP outputs for power supply and starting, preheating, and configurable stop.
Lists PNP outputs for alternator excitation, alarm, contactor, and ignition.
Provides detailed electrical characteristics for power supply, inputs, and outputs.
Offers guidance on mounting, wiring, and safety precautions for the control unit.
Provides mechanical dimensions and diagrams for the M6 control unit.
Explains important safety symbols used in the documentation and on the equipment.
Lists relevant certifications such as EMC and Low Voltage Directives.
Details parameters related to starting retries, time intervals, and motor configuration.
Defines parameters for alarm activation, cooling time, and input polarity settings.
Covers parameters for motor speed detection, overspeeding, and preheating settings.
To Next Page
