Hioki 3196 - 1.2 Features

- page 8 -
1) Short Wiring 2) Long Wiring
Current RMS Value Fluctuation
1) Short Wiring
2) Long Wiring
Current Peak Value Fluctuation
In this dryer example, the current consumption at a load is slightly reduced when the wirng is long.
The dryer is a resistive load, so that the current consumption, which means the power consumption,
is reduced by the voltage drop.
If a constant power controlled load is connected, the power consumption is stable despite the
voltage drop. Therefore, the current consumption increases.
When HOT
When HOT
When HOT
When HOT