Need help?Do you have a question about the Hioki 3390 and is the answer not in the manual?
General| Brand | Hioki |
|---|---|
| Model | 3390 |
| Category | Measuring Instruments |
| Language | English |
Provides a general description of the HIOKI 3390 Power Analyzer and its capabilities.
Details the key features and specifications of the HIOKI 3390 Power Analyzer.
Outlines the basic operational procedures and workflow for using the instrument.
Identifies and describes the various parts, controls, and connectors of the instrument.
Explains fundamental operations like screen selection and display adjustments.
Details common display items and the different screen types available on the instrument.
Provides a general overview of the steps required before performing measurements.
Guides through the initial setup and preparation steps before first use.
Details the essential checks to perform before operating the instrument.
Explains how to connect the power cord and functional earth terminal.
Describes the procedures for connecting voltage measurement cables and current sensors.
Provides instructions on how to safely turn the instrument on and off.
Guides on selecting the appropriate wiring mode for measurement.
Explains how to connect to measurement lines and perform zero adjustment.
Details how to verify correct wiring and connections for accurate measurements.
Explains the procedure for displaying measured values on the instrument.
Guides on viewing power measurements and configuring measurement settings.
Describes how to observe and interpret integration values.
Explains how to view and analyze harmonic measurement data.
Details how to display and view voltage and current waveforms.
Explains how to perform FFT analysis and view noise measurement values.
Guides on calculating and viewing efficiency and loss values.
Details viewing motor analysis parameters when specific options are installed.
Explains timing controls for saving and integration operations.
Describes the averaging function for instantaneous measurement values.
Explains the Data Hold and Peak Hold functions for freezing measurements.
Details how to create and display X-Y graphs using measurement items.
Explains the delta-wye conversion for 3-phase 3-wire systems.
Guides on performing a system reset to restore factory default settings.
Lists the factory default settings for the instrument.
Provides instructions for inserting and removing CF cards and USB flash drives.
Describes the File Operation screen for managing saved files.
Explains the procedure for formatting a CF card.
Details various saving operations like manual, auto, waveform, and screen captures.
Guides on saving measurement data manually or automatically.
Explains how to connect a printer for printing screen captures.
Describes how to connect a thermometer to acquire temperature data.
Details how to connect multiple 3390 units for synchronized measurements.
Explains how to use D/A output options for analog and waveform data.
Guides on using the motor testing option for torque, rotation, and motor analysis.
Details controlling and measuring via the Ethernet LAN interface.
Explains how to remotely control the instrument using an internet browser.
Describes controlling and measuring the instrument using a USB interface.
Provides general specifications and environmental safety information for the instrument.
Details the specifications for various functions like auto-ranging, hold, and calculations.
Lists the specifications for various instrument settings.
Provides detailed specifications for each measurement item and its ranges.
Lists the calculation formulas used for various measurements.
Provides instructions on how to clean the instrument.
Offers guidance on troubleshooting common issues and replaceable parts.
Lists error messages, their causes, and recommended remedies.
Provides instructions for the proper disposal of the instrument and its battery.
To Next Page
