7.3 CF Card Formatting
106
Format a CF card if it is not already formatted (initialized).
Insert the CF card to be formatted (p. 104), and start formatting.
This key is not used other than when upgrading the firmware.
7.3 CF Card Formatting
Formatting procedure
Upgrade
Display the
[CF cord] page
(The format confirmation dialog
appears.)
To execute:
To cancel:
(When formatting is finished,
[Completed !] appears)
Formatting erases any data stored on the CF card so that it cannot be recovered. Execute only
after confirming that no important files will be lost. We recommend keeping a backup of any
precious data stored on a CF card.
To Next Page
Loading...
