8.1 Connecting a Printer (to print captured screen images)
125
8
Chapter 8 Connecting External Devices
Select the [Interface] page of the Setting screen.
RS com speed Printing speed indications are as follows.
8.1.2 Settings to Use Printer
Making Printer Settings on the Instrument
Setting Procedure
Display the
[Interface] page
Press to perform.
Printer auto set
Select
[RS com speed]
Use the F keys to select RS-232
speed (for printing).
Select
[RS connection]
About printer auto-setup
Printer auto-setup makes the following printer settings automatically:
Baud rate : RS-232 speed set on the instrument.
International char : Display language set on the instrument.
Auto Powr Off : Disabled (OFF)
Printer mark
Turn the printer off and back on.
Press .
9600bps Slow printing
19200bps Medium-speed printing
38400bps Fast printing
• Printer auto-setup supports only printer baud rates of 9600, 19200, and 38400 bps. Set the printer's
baud rate to any of these speeds before auto-setup.
• When changing "RS connection", turn off and on the power of the instrument.
To Next Page
Loading...
