Appendix2
Measurement Data Saving Format
A2
Header Structure
Headers (item names saved at the head of the file) when measurement data is saved by manual or auto-
saving are as follows.
• Selected items are output in order from the top of the table, and from left to right.
• Measurement data is output after the last line of the header, in the same sequence as the header.
• The first three items (Data, Time, and Status) are always output regardless of selected items.
Appendix2 Measurement Data Saving Format
Output Item Header Item and Alignment
Year, Month, and Day Date
Time Time
Status Status
Elapsed Time Laptime
Elapsed Time (ms) Laptime (ms)
Voltage
RMS Urms1 to Urms4 Urms12 Urms34 Urms123
Voltage MEAN Umn1 to Umn4 Umn12 Umn34 Umn123
AC component Uac1 to Uac4
Simple average Udc1 to Udc4
Fundamental wave
component
Ufnd1 to Ufnd4
wave peak + PUpk1 to PUpk4
wave peak - MUpk1 to MUpk4
THD/ripple rate Uthd1 to Uthd4 / Urf1 to Urf4
Unbalance factor Uunb123
Current
RMS Irms1 to Irms4 Irms12 Irms34 Irms123
Current MEAN Imn1 to Imn4 Imn12 Imn34 Imn123
AC component Iac1 to Iac4
Simple average Idc1 to Idc4
Fundamental wave
component
Ifnd1 to Ifnd4
wave peak + PIpk1 to PIpk4
wave peak - MIpk1 to MIpk4
THD/ripple rate Ithd1 to Ithd4 / Irf1 to Irf4
Unbalance factor Iunb123
Effective power P1 to P4 P12 P34 P123
Apparent power S1 to S4 S12 S34 S123
Reactive power Q1 to Q4 Q12 Q34 Q123
Power factor PF1 to PF4 PF12 PF34 PF123
Phase angle DEG1 to DEG4 DEG12 DEG34 DEG123
Frequency FREQ1 to FREQ4
Integra-
tion
Integ. current in positive di-
rection
PIH1 to PIH4 PIH12 PIH34 PIH123
Integ. current in negative
direction
MIH1 to MIH4 MIH12 MIH34 MIH123
Sum of integ. Current IH1 to IH4 IH12 IH34 IH123
Energy in positive direction PWP1 to PWP4 PWP12 PWP34 PWP123
Energy in negative
direction
MWP1 to MWP4 MWP12 MWP34 MWP123
Sum of energy WP1 to WP4 WP12 WP34 WP123
Efficiency Eff1 to Eff3
Loss Loss1 to Loss3
Temperature Temp
Motor ExtA ExtB Pm Slip
Harmonic Measurement Items
Harmonic Frequency HFREQ
To Next Page
Loading...
