99
6
Chapter 6 Changing System Settings
On the [System] page, view the instrument's version information and change settings such as display
language, beep sounds, and screen colors.
Changing System
Settings Chapter 6
[System] Page Display
Press followed by to display the [System] page.
Enable/disable beep sounds.
(p. 100)
Select screen colors.
(p. 100)
Select the display
language. (p. 100)
Set LCD backlighting.
(p. 100)
View the instrument's
firmware version number.
View the instrument's
serial number.
Execute system
reset. (p. 101)
View option serial numbers.
(Not displayed when the option is not installed.)
Select the startup (initial) screen.
(p. 101)
Configure zero suppression.
(p. 101)
Set the system's
real-time clock.(p. 101)
To Next Page
Loading...
