Hioki 3390 - Manual Integration Method

4.3 Integration Value Observation
57
4
Chapter 4 Viewing Measurement Values
This method starts and stops integration by manual operation.
4.3.3 Manual Integration Method
Procedure
Manual Integration Operations
Additional Integration Operation
Disable (set to [OFF]) the interval, timer and clock
timing control settings.
See "Integration Combined with Timing Control" (p. 59)
Press .
(The key lights green, and is
displayed to indicate the operating state.)
Press again.
(The light turns off, and is
displayed.)
Press again.
(The key lights green, and is
displayed to indicate the operating state.)
Press when finished integration.
Stop
Before starting integration
Start
Additional integration
(resumes integration with the values acquired previously)
Reset the integration value
Reset
Held Constant
Displayed Integration Value
Start
Time
Stop
Resume
Held Constant
Displayed Integration Value
Start
Time
Stop
Additional