141
8
9
Chapter 9 Operation with a Computer
The instrument includes standard USB and Ethernet interfaces to connect a computer for remote control.
The instrument can be controlled by communication commands, and measurement data can be trans-
ferred to the computer using the dedicated application program.
•Control the instrument remotely by internet browser. (p. 146)
•Control the instrument remotely with communication commands
(by creating a program and connecting to the TCP/IP communication command port)
•Control the instrument remotely using the dedicated application program to transfer measure-
ment data to the computer.
•Control the instrument remotely using the dedicated application program to transfer measure-
ment data to the computer
(the program's USB driver must be installed on the computer).
Operation with a
Computer Chapter 9
Ethernet ("LAN") Connection Capabilities
USB Connection Capabilities
Download the application program (with operating manual) and the communication command
manual from Hioki’s web page (http://www.hioki.com).
To Next Page
Loading...
