Introduction
1
Thank you for purchasing the HIOKI "3390 POWER ANALYZER". To obtain maximum performance from
the product, please read this manual first, and keep it handy for future reference.
In this document, the "instrument" means the Model 3390 Power Analyzer.To measure current, the power
analyzer requires clamp-on current probes or AC/DC current probes (Options, (p. 2), afterwards referred
to generically as “current sensors”). See your current sensor’s instruction manual for details.
Registered trademarks
• CompactFlash is a registered trademark of Sandisk Corporation (USA).Windows is a registered trade-
mark of Microsoft Corporation in the United States and/or other countries.
• Sun, Sun Microsystems, Java, and any logos containing Sun or Java are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other countries.
• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in
the United States and/or other countries.
Introduction
Confirming Package Contents
3390 POWER ANALYZER ....................... 1
Confirm that these contents are provided.
Accessories
When you receive the instrument, inspect it carefully to ensure that no damage occurred during ship-
ping. In particular, check the accessories, panel switches, and connectors. If damage is evident, or if it
fails to operate according to the specifications, contact your dealer or Hioki representative.
Instruction Manual......................................1
Measurement Guide...................................1
Grounded power cord................................ 1
USB Cable................................................. 1
D-Sub Connector....................................... 1
(for use only with Model 9792 or
9793 D/A output options)
Input Cable Labels..................................... 2
(to identify voltage cable leads and input channels)
Please attach to the instrument before use.
(p. 24)
To Next Page
Loading...
