Hioki MR8880-20 - Introduction

Introduction
3
Thank you for purchasing the HIOKI Model MR8880-20 Memory HiCorder. To obtain
maximum performance from the instrument, please read this manual first, and keep
it handy for future reference.
The inputs of the instrument are specifically for voltage input.
An optional clamp-on probe is required for current measurement with the Memory
HiCorder. In this manual, all models of these probes are collectively referred to as
"clamp sensors." For details, refer to the instruction manual of the particular clamp
sensor to be used.
• Microsoft and Windows, Microsoft Excel are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and other countries.
• CompactFlash is a registered trademark of Sandisk Corporation (USA).
Introduction
Trademarks