Hioki MR8880-20 - Configuring Settings (Changing Settings)

3.3 Basic Operation
57
Chapter 3 Basic Operating Procedures
3
The settings items can be changed.
There are three procedures available for configuring the settings depending on the
purpose of use.
For details, refer to each of the reference pages.
Configuring Settings (Changing Settings)
Select the item to
change.
Show available setting
options.
Select the desired
setting.
Setting Screen
Waveform Screen
Apply the new setting,
or cancel it.
Changing screen contents
(p. 63)
(p. 67)
(p. 157)
Configuring settings
by following instruc-
tions on the screen
(Easy Setup)
Configuring settings
individually
Loading setting
configuration data
Setting configuration
data can also be loaded
from Setting Wizard.