Operating Precautions
9
Avoid the following locations that could cause an accident or damage to the
instrument.
Exposed to direct sunlight
Exposed to high temperature
In the presence of corro-
sive or explosive gases
Exposed to water, oil, other
chemicals, or solvents
Exposed to high humidity or
condensation
Exposed to strong electro-
magnetic fields
Near electromagnetic radi-
ators
Exposed to high levels of
particulate dust
Near induction heating sys-
tems (e.g., high-frequency
induction heating systems
and IH cooking utensils)
Subject to vibration
Handling the Instrument
• Do not allow the instrument to get wet, and do not take measure-
ments with wet hands. This may cause an electric shock.
• To avoid electric shock, do not remove the instrument's case.
The internal components of the instrument carry high voltages
and may become very hot during operation.
• Do not attempt to modify, disassemble or repair the instrument;
as fire, electric shock and injury could result.
• Avoid obstructing the ventilation holes on the sides of the instru-
ment, as it could overheat and be damaged, or cause a fire.
To Next Page
Loading...
