To Next PageTo Next Page
Need help?Do you have a question about the Hirobo Lama SA-315B and is the answer not in the manual?
General| Category | Toy |
|---|---|
| Manufacturer | Hirobo |
| Model | Lama SA-315B |
| Power Source | Electric |
| Type | Helicopter |
Specifies the gear ratio for the model.
Details the required radio control system.
Lists suitable engine types for the model.
Essential safety guidelines to follow before starting assembly.
Explains the meaning of symbols and signal words used in the manual.
Guidelines for preparing the flying field and checking surroundings.
Defines who can operate and under what conditions.
Checklist for inspecting the unit before starting the engine.
Information on correct fuel types and safe handling.
Guidelines on safe posture and when to stop the engine.
Crucial safety steps to follow when starting the engine.
Warnings about moving parts and hot engine components.
Rules for safe and courteous flying behavior.
Procedures for inspecting and storing the unit after flight.
Guidance on handling repairs and adjustments.
Advice on minimizing noise disturbance during operation.
Comprehensive checklist for pre-flight safety checks.
Essential checks before taking off.
Steps for inspecting the unit immediately after flight.
Guidance on where and how to store the unit.
Key advice to follow before starting assembly.
Step-by-step guide for assembling the seesaw mechanism.
Visual guide to identifying screws and their dimensions.
List of items needed for operation, sold separately.
List of basic tools required for assembly.
List of optional but helpful tools for maintenance.
Labeled diagram showing major parts of the helicopter.
Steps for assembling the elevator and aileron control levers.
Instructions for assembling the clutch bell mechanism.
Guide to assembling the fuel tank components.
Instructions for building the main frame of the helicopter.
Guide to assembling the collective pitch lever system.
Instructions for building the servo frame.
Steps for assembling the engine and its parts.
Guide for installing the assembled engine onto the frame.
Instructions for installing the landing gear.
Guide for mounting the main gear assembly.
Steps for assembling the wash-out unit.
Guide to assembling the main rotor blade holder.
Instructions for assembling the yoke and blade holder.
Guide for assembling the seesaw mechanism.
Steps for assembling the stabilizer assembly.
Guide to assembling the swashplate mechanism.
Instructions for installing the rotor head, wash-out, and swash plate.
Guide to assembling the tail unit components.
Instructions for building the tail boom truss.
Guide to assembling the tail truss and rear frame.
Instructions for attaching the assembled tail unit.
Guide for installing the servos onto the helicopter.
Instructions for installing the receiver and gyro.
Procedure to verify correct servo movement.
Guide to connecting control linkages to the rotor head.
Instructions for setting up the aileron control linkage.
Guide to setting up the elevator control linkage.
Instructions for connecting the collective pitch linkage.
Guide to setting up the throttle control linkage.
Instructions for connecting the rudder control linkage.
Procedure to verify correct rudder movement.
Guide for securely attaching the main rotor blades.
Procedure for measuring the pitch of the main rotor blades.
Recommended pitch settings for different flight conditions.
Recommended throttle settings for various flight conditions.
Instructions for fitting the side covers.
Guide to assembling the dummy braces.
Instructions for assembling the dummy engine.
Guide to assembling the cockpit interior.
Instructions for assembling the helicopter cabin.
Guide to applying decals and painting the model.
Checklist for verifying the completed assembly.
Guidelines for safely transporting the helicopter.
Rules about where flying is prohibited.
Essential checks before commencing flight.
Recommendations for insurance and safety.
Practice maneuvers mentally before actual flight.
Final checks upon arrival and general airfield advice.
Steps for fueling and adjusting the needle valve.
Initial steps and safety checks for starting the engine.
Detailed steps for starting and stopping the engine.
Step-by-step guide for adjusting rotor tracking.
How to check tracking and resolve issues.
Safety rules for practicing hovering.
Practice for controlling ascent and descent.
Practice for controlling ailerons and elevators.
Practice for controlling the rudder.
Practice for maneuvering the helicopter in circles.
Practice for maintaining hover while changing direction.
How to adjust the rudder trim for stable flight.
How to adjust the elevator trim for stable flight.
How to adjust the aileron trim for stable flight.
Common flight problems and their solutions.
Guidelines for cleaning and storing the model.
Instructions for disposing of used parts and batteries.
Checks to perform before hovering.
Solutions for problems during engine start-up.
Procedures for inspecting and repairing damage after a crash.
Regular checks for major components like mast and rotor head.
Guide for replacing the main mast.
Instructions for replacing the stabilizer bar.
Guide for replacing the feathering spindle.
Instructions for replacing the center hub.
Steps for removing and reinstalling the engine.
Exploded view diagram of all parts with numbers.
Comprehensive list of all parts with codes, prices, and remarks.
Configuration for E.POINT, D/R, EXP, and F/S functions.
Settings for trims and flight conditions (Hovering, Flight, Auto-rotation).
Configuration for D/R, Expo, Travel Adjust, and Fail Safe.
Settings for throttle and pitch curves across flight conditions.
Configuration for Auto D/R and Gyro modes.
Configuration for swash type and trims.
Settings for D/R, Expo, and Fail Safe functions.
Settings for various curves and flight conditions.
Summary of settings for different flight conditions.
Legal notices regarding reproduction and usage.
Information on manual revisions and how to contact the manufacturer.
