Hirobo EC135 - User Manual

MADE IN JAPAN
2002
INSTRUCTION MANUAL
■組立前に必ずこの説明書を最後まで、よくお読みになり、
正しくお使い下さい。
■この説明書は「EC135」専用の部分についてのものです。
「60スケールシリーズ」共通の部分は、メカニカルキッ
ト説明書をお読み下さい。特に「安全のために必ずお守
り下さい」は、飛行前に必ず読んで下さい。
■この説明書は、大切にお手元に保管して下さい。
※製品改良のため、予告なく仕様を変更する場合があります。
■Please read this manual in its entirety before attempting
to assemble the helicopter.
■This manual explains the parts exclusive to EC135. For
parts common to the 60 scale series, please read the
mechanical kit manual. In particular, please read the
section entitled ’Always follow these rules for safety’
before attempting to fly the helicopter.
■Keep this manual in a safe place.
※Changes in product specifications may be effected
without notice.
60-91 class
SCALE HELICOPTER
BODY KIT
eurocopter
EC135
取扱説明書
No. 10893

Summary

Eurocopter EC135 Body Kit Instruction Manual

Cockpit Assembly

Detailed steps for assembling the helicopter cockpit and its components, including fitting and adhesive use.

Dashboard Assembly

Instructions for assembling the instrument panel, including trimming and fitting plywood parts.

Sheet Assembly

Guidance on assembling seat components and preparing them for installation, including cutting and gluing.

Attaching Accessories Part 1

Steps for attaching control lever and wiper components to the cockpit interior.

Attaching the Top Cover

Procedure for attaching the top cover, including reinforcement plywood and starter shaft hole preparation.

Skid Assembly

Instructions for assembling the skid landing gear, including cutting rear pipes and using cyanoacrylate glue.

Attaching the Tail Pipe

Steps for attaching the tail pipe assembly, including cutting glass pipes and aligning components.

Attaching Accessories Part 2

Instructions for attaching exhaust pipes and antenna to the fuselage, ensuring correct left/right placement.

Attaching the Windows

Detailed steps for cutting and attaching fuselage windows and tail stabilizers using canopy bond or epoxy.

Attaching the Doors

Procedure for attaching the helicopter doors, including hinge assembly and lock plate installation.

Painting

Guidelines for painting the cockpit interior and exterior, including surface preparation and decal application.

Attaching the Fenestron

Steps for attaching the fenestron (tail rotor mechanism) and its linkages, including servo mounting.

Attaching the Receiver and Battery

Instructions for installing the receiver and battery, focusing on weight balance and placement.

Attaching the Main Frame and Skid

Procedure for installing the main frame and connecting the skid landing gear, including muffler fitment.

Attaching the Rotor Head and Top Cover

Steps for attaching the rotor head assembly and performing interference checks with the body.

Affixing the Decals

Guidance on applying fuselage numbers and country markings, recommending reference photos for accuracy.

Technical Data and Parts Information

Data Sheet

Technical specifications and settings for radio transmitters, including Futaba FF9-H and JR X-3810 models.

Spare Parts Information

Details on ordering replacement parts, including contact information, payment methods, and order form.

Hirobo EC135 Specifications

General

Brand	Hirobo
Model	EC135
Power Source	Electric
Material	Plastic
Type	RC Helicopter