EasyManua.ls Logo

Hirobo jm2-0307903 User Manual

Hirobo jm2-0307903
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
■主要諸元
●全備重量(参考)5,700g
(使用ESC
SPEC
●Overall weight (reference): Approx. 5,700g
(Varies depending on the type of battery, ESC,
blade or other parts used.)
別売品 Sold separately
MADE IN JAPAN
C
2014
No.10G41
組立前に必ずこの説明書を最後まで、よくお読みになり、
しくお使いください。特に、「1. 組立を始める前に必ずお読
みください」は、組立前及び飛行前に必ずお読みください。
この説明書は、大切にお手元に保管してください。
製品改良のため、予告なく仕様を変更する場合があります。
Before assembly, make sure to completely read this instruction
manual. In particular, make sure to read the "1. Read before
assembly" section before assembly and operating the unit.
Keep this instruction manual in a handy, safe place.
In order to make improvements to this product, specifications
may be altered without prior notice.
200mm
417mm
1,490mm
1608mm
266mm
■メインブレード:680-760mm
■テールブレード:90-105mm
■バッテリー:リチウムポリマーバッテリー 5 cell (18.5V)
 又は6 cell (22.2V)×248005500mAh奨)
 搭載可能(幅60mm50mm200mm
■モーター:ブラシレスモーター ø6シャフト KV450630
ESC(ア10 cell又は12 cell対応 120A上推
■プロポセット:
前後1:1のスワッシュモード機能の付いた送信機。
3+3(エルロレベ
Main blade: 680-760mm
Tail blade: 90-105mm
Battery: Lithium polymer battery 5 cell (18.5V) or 6 cell (22.2V)×2 packs
(48005500mAh recommended)
Mountable size (Width 60 mm, height 50 mm, length 200 mm)
Motor: Brussless motor ø6 shaft KV450-630
ESC (amp): 10 cell or 12 cell, 120 A or higher recommended
Transmitter set:
A transmitter with the swash mode function having front and back ratio of 1:1.
3 servos + rudder servo and 3 axis (aileron, elevator, pitch) gyro
0414-538 WCカーボン対称メインブレード L=720使用時
0404-721 WCカーボンテールブレード L=90使用時
With 0414-538 WC carbon symmetric main blade L=720
With 0404-721 WC carbon tail blade L=90

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hirobo jm2-0307903 and is the answer not in the manual?

Hirobo jm2-0307903 Specifications

General IconGeneral
BrandHirobo
Modeljm2-0307903
CategoryToy
LanguageEnglish

Related product manuals