Hirobo sst-eagle FREYA Evolution User Manual

組立前に必ずこの説明書を最後まで、よくお読みにな
り、正しくお使い下さい。特に、「1.組立を始める前
に必ずお読み下さい」は、組立前及び飛行前に必ず読
んで下さい。
この説明書は、大切にお手元に保管して下さい。
製品改良のため、予告なく仕様を変更する場合があります。

Before assembly, completely read this instruction
manual. In particular, read the "1. Read before
assembly" section before assembly and operating the
unit. 
Keep this instruction manual in a handy, safe place.
In order to make improvements to this product, the
specifications is subject to change without prior notice.
MADE IN JAPAN
C
2005
No.10A67
200mm

453mm

1,375mm

1,561mm

270mm

主要諸元
Main features
ギヤ比
Gear ratio


無線機
Radio control device

適合エンジン
Compatible engine




/60~70クラスエンジン 9.5 : 1 : 4.77
60~70 class engine 
80~90クラスエンジン 7.9 : 1 : 4.77
80~90 class engine 
/ ヘリ用プロポセット (別売)
Programmable transmitter set for model 
helicopters (Sold separately)
/ 60~90クラス (別売) 
60~90 class engine (Sold separately)
※(マフラー別売) (Muffler isn't included)


Hirobo sst-eagle FREYA Evolution Specifications

General

Brand	Hirobo
Model	SST-Eagle Freya Evolution
Skill Level	Advanced
Channels	6
Gyro	Not included

Summary

1. Read before assembly

Before starting the engine

Fuel

While in flight

For safe handling of the radio controlled helicopter

Pre-flight inspection

Detailed checks to ensure the helicopter is safe and ready for operation.

In-flight safety check

How to use this instruction manual

Pre-assembly precautions

Crucial steps and advice to follow before commencing any assembly of the unit.

9 Swash plate assembly

Items necessary for flying this model not included in this kit (Sold separately)

Tools necessary for assembly

2. Assembly

Elevator lever assembly

Instructions for assembling the elevator lever mechanism of the helicopter.

Counter gear assembly

Procedure for assembling the counter gear unit, a critical part of the drivetrain.

Servo frame assembly

Step-by-step guide for assembling the servo frame, housing essential control servos.

Fuel tank assembly

Instructions for correctly assembling and connecting the fuel tank and lines.

Main frame assembly

Detailed steps for constructing the main structural frame of the helicopter.

Landing gear installation

Guide for attaching the helicopter's landing gear system securely.

Engine assembly

Detailed steps for assembling the engine unit onto the helicopter frame.

Servos installation

Main blade assembly

3. Flight

Prohibited Flight Areas

Checking the unit before flight

Safety measures

Preparations prior to starting the engine

Filling the fuel tank

Needle valve adjustment

Starting and stopping the engine

Adjusting the tracking

Hovering practice

Throttle operation practice

Aileron and elevator operation practice

Rudder operation practice

Adj ustment of each trim

Adjust the rudder's trim

Adjust the elevator's trim

Adjust the aileron's trim

How to eliminate troubles during flight

4. Maintenance section

In case of a fall or crash

Main Mast Replacement

Stabilizer Bar Replacement

Spindle Replacement

Center Hub Replacement

Engine Replacement

Tail Boom Replacement