Hirschmann OZD Profi 12M G11 - Installation; Checking the package contents; Mounting the device; Setting compatibility

4
Installation OZD Profi 12M ...
Release 01 07/2017
4.2 Mounting the device 39
4.2.1 Installing the device onto the DIN rail 39
4.3 Setting compatibility 40
4.4 Setting the operating mode and transmitting power 43
4.4.1 Setting the operating mode of the electrical ports
(CH1, CH2) 43
4.4.2 Setting the operating mode of the optical ports (CH3,
CH4) 44
4.4.3 Reducing the optical transmitting power 45
4.5 Connecting the optic bus cables 46
4.6 Connecting the electric bus cables 47
4.7 Connecting the function ground and the shield of the bus
cable 49
4.8 Connecting the power supply 50
4.9 Connecting the signal contact (optional) 51
4.10 Connecting the analog voltage outputs (optional) 52
5 Configuration 54
6Disassembly 56
7 Technical data 57
8 Scope of delivery, order numbers and
accessories 61
9 Underlying technical standards 62
10 Help with problems 63
10.1 Troubleshooting 63
10.2 Systematic troubleshooting 64
10.3 Problem reporting 65
A Further support 66