9
Interfaces
RS2-4R 2 to 4 TP/TX ports (RJ45 sockets,10/100 MBit/s),
V.24 port external management,
Indicator contact 1 A maximum, 24 V
in addition 2 type depending ports each: FX ports with DSC sockets (100 MBit/s), singlemode, multimode or long haul (LH)
–RS2-4R 4 TP/TX ports
RS2-4R 1MM SC 3 TP/TX ports, 1 FX port (multimode / MM, port 4)
RS2-4R 1SM SC 3 TP/TX ports, 1 FX port (singlemode 1300 nm / SM, port 4)
RS2-4R 1LH SC 3 TP/TX ports, 1 FX port (singlemode 1550 nm / LH, port 4)
RS2-4R 2MM SC 2 TP/TX ports, 2 FX ports (multimode / MM, port 3 and 4)
RS2-4R 2SM SC 2 TP/TX ports, 2 FX ports (singlemode 1300 nm / SM, port 3 and 4)
RS2-4R 2LH SC 2 TP/TX ports, 2 FX ports (singlemode 1550 nm / LH, port 3 and 4)
Displays
Equipment status 1 x green LED P1 – power 1, supply voltage 1 present
1 x green LED P2 – power 2, supply voltage 2 present
1 x red LED FAULT – indicator contact is open and indicates error
1 x green/yellow LED RM – redundancy manager + autoconfig adapter
Port status 4 x green LED LS 1 to 4 – link state
4 x yellow LED DA 1 to 4 – data
Controls
2-pole DIP switch RM – activate redundancy manager functionality
RING – Aktivierung HIPER-Ring-Funktion
Scope of delivery
Rail Switch RS2-4R incl. terminal block for supply voltage, description and operating instructions
manual RS2-4R on CD-ROM
Order number
RS2-4R 943 846-
RS2-4R 1MM SC 943 847-
RS2-4R 1SM SC 943 848-
RS2-4R 1LH SC 943 849-
RS2-4R 2MM SC 943 850-
RS2-4R 2SM SC 943 851-
RS2-4R 2LH SC 943 852-
Accessories
ETHERNET manual 943 320-011
Manual
Basics Industrial ETHERNET and TCP/IP 280 720-834
Terminal access cable 943 301-001
Rail Power Supply RPS 30 943 662-003
Rail Power Supply RPS 60 943 662-001
Rail Power Supply RPS 120 943 662-011
AutoConfiguration Adapter ACA 11 943 751-001
Network Management Software HiVision 943 471-100
To Next Page
Loading...
Need help?
General
