Need help?Do you have a question about the Hirschmann RSP 30 and is the answer not in the manual?
General| Type | RSP 30 |
|---|---|
| Operating Temperature | -40°C to +70°C |
| Mounting | DIN Rail |
| Protection Class | IP30 |
| Device Type | Managed Switch |
| Port Type | Gigabit Ethernet |
| Power Supply | 24 V DC |
| Protocol Support | Ethernet/IP, PROFINET, Modbus TCP |
| Redundancy | MRP, RSTP |
Covers safe operation, certified usage, device handling, and personnel qualifications.
Details requirements for fire enclosures, restricted access locations, and environmental conditions.
Details ATEX directive and specific regulations for explosive atmospheres.
Covers IECEx, CE, FCC, and recycling notes for product compliance.
Details different supply voltage types (K9, KK, TT, CC) and their terminal block connections.
Describes various Ethernet ports (10/100, 100/1000, F/O) and their pin assignments.
Covers installing the device onto a DIN rail and proper grounding procedures.
Explains how to connect supply voltage and signal contact terminal blocks.
Details options for configuring IP addresses and default network parameters.
Explains how to upgrade the device software based on different versions.
Details compliance with Electromagnetic Compatibility (EMC) and immunity standards.
To Next Page