To Next PageTo Next Page
Need help?Do you have a question about the Hirschmann RS20 series and is the answer not in the manual?
General| Port Count | Up to 24 ports |
|---|---|
| Mounting | DIN Rail |
| Operating Temperature | -40°C to +70°C |
| Protection Class | IP30 |
| Switching Technology | Store-and-forward |
| Port Type and Speed | 10/100BASE-TX, 100BASE-FX |
| Power Supply | 24 V DC or 110-230 V AC |
| Certifications | CE, UL, cUL, DNV, GL, ABS, IECEx, ATEX |
| Management | Web, SNMP, CLI |
| Redundancy | MRP, RSTP |
| Dimensions | Varies depending on model |
| Weight | 500 g |
Covers general safety, certified usage, and installation site requirements.
Explains symbols and lists available manuals.
Details product variants, number of ports, and media types.
Describes device variants that support Power over Ethernet.
Details types and specifications of Ethernet ports.
Explains the function of device status LEDs.
Describes USB and V.24 interfaces for management.
Procedure to verify all items are included and undamaged.
Instructions for installing and grounding the device safely.
Steps for optional installation of SFP transceivers.
How to configure DIP switch settings for device options.
How to connect the terminal block for power and signal.
Procedure for mounting the terminal block onto the device.
Instructions for connecting the ferrite for EMC compliance.
Steps to begin operating the device after installation.
Recommendations for connecting data cables.
Guidance on filling out the device inscription label.
Step-by-step instructions for safely removing the device.
